Hey, since you have an E, it is not required to flash the .bin.
Download the .zip from here and follow the instructions. Nothing should go wrong but if anything does, Acers fault.
Hi there, I`m wondering about update my Acer Liquid E from 2.1 to 2.2 android version.
I`ve read many "How to" etc. BUT better informed than bricked!
So I have no brand Acer Liquid E, which I bought few days ago.
Here some information:
So of course I read here. I should find *.bin file with "EMEA_GEN1" which is THERE. So with this *.bin file I can upgrade my android by microSD card solution? (put in on root of microSD, turn off, volume down+camera+power-on ... bla bla)?
For example this stuff 4.002.08_EMEA-GEN1_05.01.05(For Liquid E 512MB)
I really like either this Eiclar version, but want to use flash and other stuffs in 2.2.
Thank you ;-)
BIG sorry for my really bad english...
BUT if you do want to flash the .bin-
Here are instructions: [TUTORIAL] How to flash .bin files on Acer Liquid/E - Android @ MoDaCo
If anything goes wrong, check this out: [TIP] Dont try to restart phone during flash if it looses connection, or u will have a bricked liquid! [MOD PLEASE STICKY!] - Android @ MoDaCo
Hmm, new OS works fine, but I think i have problem with camera... when it was version 2.1, the camera was set to 5 MPX and higher quality super fine. Now settings are same, but the photos are 4x smaller (on disc). The resolution is same, but there is DPI difference 92dpi on 2,1 version and 72dpi on 2,2 version of OS. I think the picture quality is bit lower. But not 100%.